-
Posts
538 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Gallery
Posts posted by Bianca
-
-
-
-
-
-
Hi @bytebus,
You have a private message.
Sorry for the delay. I was out of office all week.
Best regards,
Bianca
-
-
It seems you have an issue with the drivers on this one. Sometimes when you install Vivado the drivers don't install correctly. So, if you have vivado Installed, please try to install manually the drivers. Here is the path to file the cable drives, It's the same on each installer: C:\Xilinx\Vivado\2015.4\data\xicom\cable_drivers\nt64\digilent I have a previous version of Vivado, you'll have 2017.2
Please try this and if it's not working we'll see if there's anything else we can do
Best regards,
Bianca
-
-
-
-
-
-
-
Hi @Franco,
Sorry for the late response. I was out of office for a week. I will provide you the application in case no one attended you until now.
Best regards,
Bianca
-
Hello,
Please check your private messenger for the program and instructions.
Best regards,
Bianca
-
Hello,
Please check your private messenger for the program and instructions.
Best regards,
Bianca
-
-
-
-
Hello, @twister
Please check your private messenger. You'll have the reprogramming application and the instructions.
Best regards,
Bianca
-
-
Hello vijay,
I will give you the firmware. We'll talk more about it in the private messenger.
Best regards,
Bianca
-
Hello,
You can reprogram the memory of your device.
In the link below you will find the application to reprogram the memory of your device. Please follow the given instructions:
https://drive.google.com/file/d/0B-YtGABZihr-NjU4Rjg4dzhhaTA/view
- make sure to have only the SMT1 connected to the computer. No other FTDI-USB device, like: USB-UART converter and close other applications, like: WaveForms, Xilinx iMPACT, Matlab....
-start FTDIConfig
-press "Find Devices"
-Pres "Get Info"
-select present: "JTAG-SMT1'
-press "Program"
-press Cycle
-close FTDICOnfig
-start Adept and see if the cable is recognized.
Best regards,
Bianca
Analog Discovery troubleshooting
in Test and Measurement
Posted
Hi @Fkawall,
If you have a desktop please try to use the USB ports on the back and if you have a laptop try other ports. You can also try to connect it to another computer to see if the error persists. Right now the discovery doesn't get enough power to start. Maybe a powered USB HUB could also help or to power it from a 5V external power supply. Try with what you have and see if you can see any difference on the connection.
- different USB ports
- different computers
- shorter USB cable with data wires
- Powered USB HUB
- External Power supply.
Let us know what you can find.
Best regards,
Bianca