Hello JColvin,
Thank you for your reply.
Regarding your questions my answers are given below.
- The os is Windows10 home (version 20H2) (OS Build 19042.867).
- When the board is connected with USB micro B cable, device manager adds
USB Serial port(COM8), USB Serial Converter A and USB Serial Converter B.
In Bus reported device description, Value is displayed as Digilent USB Device
for both converters.
- Regarding cable drivers i run install_drivers in administrator mode
and the results in install_drivers_wrapper.txt is attached.
I like to know more details about this cable drivers
and their role in arty a7 board communication.
- While running Adept, in connect detail Arty is displayed. In Config window
"No devices identified" message is displayed.
- After placing the jumper JP1, Using Tera Term VT setting the
com8 baud rate at 115200, after pressing the PROG button
Avnet/Digilent Arty Evaluation Board LEDs and switches GPIO Demonstration
is running and communication details are displayed in terminal window.
- I tried with another cable which is used with Android phone for data transfer.
but end up with same result.
I request your advice to correct this. Thank you.
With regards,
Subbu cabledriver01.txt