Jay Patel

Hello sir We purchased "Arty-Z7-20" a few weeks ago. We are trying to boot a project using the petalinux. We have followed the manual given in the below links. https://www.xilinx.com/support/documentation/sw_manuals/xilinx2020_1/ug1144-petalinux-tools-reference-guide.pdf https://www.xilinx.com/support/documentation/sw_manuals/xilinx2019_1/ug1157-petalinux-tools-command-line-guide.pdf But the Arty-Z7-20 board didn't get booted via jtag or SD card. We have also followed steps provided on belowed github, but it won't work.. https://github.com/Digilent/Petalinux-Arty-Z7-20 Output while running boot command shown below, '$ petalinux-boot --jtag --prebuilt 3 --hw_server-url TCP:127.0.0.1:3121' INFO: Sourcing build tools WARNING: Will not program bitstream on the target. If you want to program bitstream, WARNING: please run petalinux-package --prebuilt to put the bitstream to the prebuilt directory, WARNING: or use --fpga --bitstream option to specify a bitstream. INFO: Append dtb - /home/harshil/FPGA/Project_Petalinux/project_linux/pre-built/linux/images/system.dtb and other options to boot zImage INFO: Launching XSDB for file download and boot. INFO: This may take a few minutes, depending on the size of your image. rlwrap: warning: your $TERM is 'xterm-256color' but rlwrap couldn't find it in the terminfo database. Expect some problems.: Inappropriate ioctl for device INFO: Downloading ELF file: /home/harshil/FPGA/Project_Petalinux/project_linux/pre-built/linux/images/zynq_fsbl.elf to the target. INFO: Downloading ELF file: /home/harshil/FPGA/Project_Petalinux/project_linux/pre-built/linux/images/u-boot.elf to the target. INFO: Loading image: /home/harshil/FPGA/Project_Petalinux/project_linux/pre-built/linux/images/system.dtb at 0x00100000 INFO: Loading image: /home/harshil/FPGA/Project_Petalinux/project_linux/pre-built/linux/images/uImage at 0x00200000 INFO: Loading image: /home/harshil/FPGA/Project_Petalinux/project_linux/pre-built/linux/images/rootfs.cpio.gz.u-boot at 0x04000000 INFO: Loading image: /home/harshil/FPGA/Project_Petalinux/project_linux/pre-built/linux/images/boot.scr at 0x03000000 INFO: SOC Silicon version is 3.1.