gregm102

Members
  • Content Count

    3
  • Joined

  • Last visited

About gregm102

  • Rank
    Newbie

Recent Profile Visitors

The recent visitors block is disabled and is not being shown to other users.

  1. Since there is no answer or reponse from DIGILENT Iwould like to request and RMA number and return the defective Adapter.
  2. Just received a jtag-hs2 to use with a nexysA7-100T board. Building the pulp risk CPU and failing to connect via openocd. I have a different brand cable that does work, so I know my design is basically correct. Using the -d3 flag on the openocd command line indicates that a timeout is occurring periodically with the following messages. the message below indicates a failure scanning hart52 - the design has 1024 harts and it will fail at a random number. As I mentioned it works fine with a different cable Is my HS2 defective or does it need to be re-flashed? (at signed replaced with AT)
  3. Just received a jtag-hs2 to use with a nexysA7-100T board. Building the pulp risk CPU and failing to connect via openocd. I have an olimex tiny-usb that does work, so I know my design is basically correct. Using the -d3 flag on the openocd command line indicates that a timeout is occurring periodically with the following messages. the message below indicates a failure scanning hart52 - the design has 1024 harts and it will fail at a random number. As I mentioned it works fine with the olimex. Is my HS2 defective or does it need to be re-flashed? Debug: 854 425 riscv-013.c:404 scan(