wangmengsail

Members
  • Content Count

    5
  • Joined

  • Last visited

About wangmengsail

  • Rank
    Newbie

Recent Profile Visitors

The recent visitors block is disabled and is not being shown to other users.

  1. After turning on the power switch (SW1) in NetSUME board, I only see the Power LED (LD10) on... in red and the DONE LED is off . I checked that JP1 is not shorted,and I pressed the button PROG in NetSUME board. I think CPLD xc2c512 has been accidentally reprogrammed over JTAG although that is less likely. The following command run at a terminal: dsumecfg write -d NetSUME -f production_test.bit -s 0 -verify Error information at a terminal is following: Configuring FPGA... FPGA configuration succeeded. Erasing Flash: 0%ERROR: timed out after 25000ms while waiting fo
  2. Thank you for your kind reply. I hope someone can continue to help me
  3. Dear Sir, I just buy a NetSume FPGA board, but I don't know how to program bit file into Flash memory. First things first, I checked that JP1 is not shorted. Then I run through this guide: https://github.com/NetFPGA/NetFPGA-SUME-public/wiki/Reference-Operating-System-Setup-Guide. After I complete it, I run the following command at the terminal: dsumecfg write -d NetSUME -f production_test.bit -s 0 -verify Error information is following: Configuring FPGA... FPGA configuration succeeded. Erasing Flash: 0%ERROR: timed out after 25000ms while waiting for FPGA handsha
  4. Dear Sir, I just buy a NetFPGA-Sume FPGA board, but I don't know how to program bit file into Flash memory. First things first, I checked that JP1 is not shorted. Then I run through this guide: https://github.com/NetFPGA/NetFPGA-SUME-public/wiki/Reference-Operating-System-Setup-Guide. After I complete it, I run the following command at the terminal: dsumecfg write -d NetSUME -f production_test.bit -s 0 -verify Error information is following: Configuring FPGA... FPGA configuration succeeded. Erasing Flash: 0%ERROR: timed out after 25000ms while waiting for FPGA ha