painterguy1995

Newcomers
  • Content Count

    5
  • Joined

  • Last visited

  1. Hi: The following is from reference manual of uC32. Do I need to install the driver? I plan to use uC32 with Arduino IDE. I'd appreciate it if you could clarify this. Thank you!
  2. Hi @JColvin Thanks a lot for the help! Question 1: How much power uC32 board could supply to the attached devices? What's the maximum current which could be supplied by each pin separately and combined at the same time? I'd really appreciate it if you could help me with it. In the attached picture I have highlighted the pins I'm talking about. I believe 3V pin stands for 3.3V. Question 2: Does uC32 come preloaded with Arduino bootloader?
  3. Thank you! Let me clarify. So, most of the digital pins on the uC32 can technically read 5V signals but cannot output 5V. You said that the ADC header on the uC32 cannot handle 5V signals though. I think it means that since ADC does analog to digital conversion therefore uC32 cannot handle 5V input on its pins to convert it into digital representation. Please correct me if I'm wrong. Thanks.
  4. Hi, I'm planning to buy uC32 and it uses 3.3V logic level. As far as I know all Arduino Uno shields (or any Arduino shield) are 5V, so can I connect those shields to uC32? Could you please guide me? Thanks.