laurent01

Newcomers
  • Content Count

    8
  • Joined

  • Last visited

  1. Hi Colvin, Here is my settings. And I think firewall might be the problem and I will try to resolve it as soon as the exam finished Thank you for reading and answering my questions. Thank you Colvin.
  2. Yes I connect to 192.168.1.10 via port 7 with Telnet Protocol. But I cannot type anything and I cannot see the output. Thank you so much.
  3. Hi Colvin. As you said, I connect zybo with an ethernet cable. I check my zybo operates server with IP 192.168.1.10 And by tera term, I try to connect 192.168.1.10 with telnet at port 7. Even if I double check I assign fixed IP address to use same address range at network and share center and by ipconfig command, Tera term doesn't respond and I can't type anything. And please note that I use Desktop which doesn't have WiFi, so I only have connection with zybo. Can you help me? Thank you so much colvin. I really appreciate your help.
  4. Hi Colvin. Thanks to you, I resolve the problem above. It seems that the server is well established. However, I cannot connect to the server even if I use fixed IP Settings given that I have no router. Can you help me? Thank you so much.
  5. Hi Colvin I really appreciated it Thank you so much
  6. Hi Colvin. I'm using Vivado 2019.1 and SDK 2019.1 But I also tried Vivado 2018.3 and SDK 2018.3 without success Thank you.
  7. Hi. I have a problem while trying lwIP Echo server wiht Zybo-Z7 I follow this tutorial faithfully https://reference.digilentinc.com/learn/programmable-logic/tutorials/zybo-getting-started-with-zynq-server/start but I face with a problem This problem occurs for both connection through router and connection directly with my laptop or desktop I try with 3 PC and all of it shows same result. Google suggest me to configure ethernet to be 100Mbps half duplex with Fixed IP settings and it doesn't work. I double-check that I'm using correct MIO pin and fix the 100Mbps at SDK. Is there any solution to resolve this problem? Thank you.