mathewg

Newcomers
  • Content Count

    2
  • Joined

  • Last visited

  1. Turns out that artvvb's xsa file provided sufficiently good defaults to build a working petalinux 2019.2 image with no petalinux-config modifications.
  2. I'm trying to build a petalinux 2019.2 image for the arty-z7-20. The hardware component being used here is the xsa example kindly provided by artvvb in the link/image below I created a new zynq templated petalinux project and manually entered configurations via petalinux-config using the file here https://github.com/Digilent/Petalinux-Arty-Z7-20/blob/v2017.4-1/Arty-Z7-20/project-spec/configs/config as a reference. (the petalinux project repo in the link above builds and run as expected on petalinux 2017.4) When I run petalinux build with 2019.2 I get an md5 checksum / license error described in the attached log file. I suspect it's from this petalinux configuration here https://github.com/Digilent/Petalinux-Arty-Z7-20/blob/16a8ed68d2ebf4b6c6441f91790cb6253c3ad4a4/Arty-Z7-20/project-spec/configs/config#L21 which points to this repo here https://github.com/Digilent/u-boot-Digilent which doesn't have a a 2019.2 u-boot version. Any insights on how to navigate this would be great! -M