Himani

Hi, Ciprian This is a good blog with multiple examples.. http://zynqhowto.blogspot.com/2014/03/blog-post.htm specific link on XADC on zedboard.. https://www.linkedin.com/pulse/using-xadc-zynq-adam-taylor-ceng-fiet/ let me know if you find some solution regarding my Problem.

Hi, I have a ZEDBOARD which I want to interface it to an analog input signal and see the sinusoidal output. i'm following lab 3 tutorial by Adam Taylor. So, as for the first step, I tried to connect the signal generator to Vn and Vp. I expected to see the sinusoidal shape of the voltage in XADC dashboard (XADC wizard demo). and also set the ENABLE_ALL_AUXILIARY_CHANNELS check mark, which will include Vp/Vn. I set the function generator to frq 50Hz and amplitude 400-600 vpp, or DC also I applied and checked the signal on the dashboard and serial oscilloscope both. But, the board produces no reaction and the Vp_Vn channel still gives an uneven sine wave or i guess its noise or something else. I tried so many times but still i'm stuck at this point . Could anyone suggest any solution or PoW ?