Jump to content

chaitusvk

Members
  • Posts

    43
  • Joined

  • Last visited

Everything posted by chaitusvk

  1. i am generating device tree with " petalinux-create --type project --template zynq --name zybo_acu_linux" and config with " petalinux-config --get-hw-description ../zynq_acu/" But ... In device tree i have cpu 1 , PTM and Funnel associated with CPU1 which is not physically present cpus { #address-cells = <1>; #size-cells = <0>; cpu0: cpu@0 { compatible = "arm,cortex-a9"; device_type = "cpu"; reg = <0>; clocks = <&clkc 3>; clock-latency = <1000>; cpu0-supply = <&regulator_vccpint>; operating-points = < /* kHz uV */ 666667 1000000 333334 1000000 >; }; cpu1: cpu@1 { compatible = "arm,cortex-a9"; device_type = "cpu"; reg = <1>; clocks = <&clkc 3>; }; }; ptm@f889d000 { compatible = "arm,coresight-etm3x", "arm,primecell"; reg = <0xf889d000 0x1000>; clocks = <&clkc 27>, <&clkc 46>, <&clkc 47>; clock-names = "apb_pclk", "dbg_trc", "dbg_apb"; cpu = <&cpu1>; out-ports { port { ptm1_out_port: endpoint { remote-endpoint = <&funnel0_in_port1>; }; }; }; }; please help me how to generate proper device tree ...for Single core Cora Z7 i am using petalinux 2021.2
  2. HI i am to embedded Linux i am trying to Build petalinux on Zybo Z7 with just Zynq These Steps i followed 1. Create Viavdo project With Zynq with TTC0 Enabled generated xsa 2. Created Petalinux project with "petalinux-create --type project --template zynq --name test_peta" 3. configured Petalinux with "petalinux-config --get-hw-description ../ " enabled a.image packing configuration to EXT4 (SD card) b. premirror url to downlaoded files c. local state feeds to to downloded local sstate 4. Bulid petalinux with : " petalinux-build" i am able to see files generated in images/linux with out any error 5. Packaged with "petalinux-package --boot --fsbl images/linux/zynq_fsbl.elf --fpga project-spec/hw-description/design_1_wrapper.bit --uboot --force" i am able to see boot.bin generated 6. formated the SD in to Two BOOT:fat32, rootfs:ext4 .. 7. copied "BOOT.BIN,image.ub,boot.scr" to BOOT 8. tar xvf rootfs.tar.gz -C /media/rootfs But , i am unable to boot petalinux, previously i used 2019.1 with that i amble to boot ...my green led was glowing then , now not glowing any thing extra i have to activate please help ...
  3. HI , i want to use GPS Pmod for time reading In indoor , i have GPS external antenna Does Pmod have SMA connector built ? or any suggestion to connection external active antenna
  4. Able to generate with help of hysc , vsync and pixel clock
  5. I am working with Zybo Z7 board i wan to generate interlaced video does it support it
×
×
  • Create New...