Azzor

Members
  • Content Count

    5
  • Joined

  • Last visited

About Azzor

  • Rank
    Newbie

Recent Profile Visitors

The recent visitors block is disabled and is not being shown to other users.

  1. Azzor

    Vivado sysnthesis fail..Pcam

    A new monitor solved the problem. Resolution problem. Thanks for your help! i now can practice on the Zybo!
  2. Azzor

    Vivado sysnthesis fail..Pcam

    Hi! I tried with another monitor... QSPI jumper option... is working I change the jumper to JTAG and I see 5 bars pink-green bars on the monitor But now i understand that the menu is frozen (the first one), i checked the code and it should change to submenus... Any ideas? thanks
  3. Azzor

    Vivado sysnthesis fail..Pcam

    Hi! In the menu im choosing all the options, a led in the zybo flashes everytime i click a letter... but the monitor still says "mode not supported".. i'll try another monitor Thanks!
  4. Azzor

    Vivado sysnthesis fail..Pcam

    Hi! I'm so close now! can you please help me with this I did the instructions on the Vivado 2018.2 I did the export to hardware, then launch SDK... imported code... I created the new application "pcam_vdma_hdmi", I opened a serial connection with Tera Term I selected "Xilinx" from the menu, and then "Program FPGA" Then i ran "pcam_vdma_hdmi" with "Run As -> Launch on Hardware (System Debugger)" I now can see the Menu on TeraTerm but on the monitor says "MESSAGE... MODE NOT SUPPORTED". I have the jumper JP5 on JTAG (when i put it on QSPI i get the lines and colors, so the monitor is working) The JP6 is on Wall 'cause i'm using power from the wall. Am i missing a jumper or something? Thanks!
  5. I'm trying to run the Zybo Z7 Pcam 5C Demo... i'm really new at this, the instructions say: ********************************************************** To generate the project: 1. Open Vivado 2017.4 2. In the tcl console, type "cd [this directory]/proj" and press enter. 3. Type "source ./create_project.tcl" and press enter to generate the block design for the project. To run the demo from SD card: 1. Copy bin/BOOT.bin to the root of your SD card. 2. Set the boot jumper on the Zybo Z7 to SD. 3. Insert the SD card into the Zybo Z7 and power it on. ************************************************** I'm using Vivado 2017.4 and i've copied the board_files to vivado software. After the point 3. (Type "source ./create_project.tcl") I get 7 warnings about some pins... am im doing something wrong here? I'm a newbie. Can you help me out to make the demos work, thanks in advance! ********************************************************************************************************* ## create_root_design "" WARNING: [BD 41-1306] The connection to interface pin /sw_gpio/gpio_io_i is being overridden by the user. This pin will not be connected as a part of interface connection GPIO WARNING: [BD 41-1731] Type mismatch between connected pins: /rgb2dvi_0/aRst_n(rst) and /v_axi4s_vid_out_0/locked(undef) WARNING: [BD 41-1306] The connection to interface pin /blur_edge_detect_0/ap_start is being overridden by the user. This pin will not be connected as a part of interface connection ap_ctrl WARNING: [BD 41-1306] The connection to interface pin /color_to_bw_0/ap_start is being overridden by the user. This pin will not be connected as a part of interface connection ap_ctrl WARNING: [BD 41-1306] The connection to interface pin /invert_0/ap_start is being overridden by the user. This pin will not be connected as a part of interface connection ap_ctrl Wrote : <C:/DesignVivado/Zybo_Z7_Embedded_Vision_Demo2/proj/bd/system/system.bd> Wrote : <C:/DesignVivado/Zybo_Z7_Embedded_Vision_Demo2/proj/bd/system/ui/bd_c954508f.ui> WARNING: [BD 41-721] Attempt to set value '50000000' on disabled parameter 'C_S_AXI_LITE_FREQ_HZ' of cell '/MIPI_D_PHY_RX_0' is ignored WARNING: [BD 41-721] Attempt to set value '200000000' on disabled parameter 'kRefClkFreqHz' of cell '/MIPI_D_PHY_RX_0' is ignored WARNING: [BD 41-721] Attempt to set value '100000000' on disabled parameter 'kRefClkFreqHz' of cell '/video_dynclk' is ignored INFO: [digilentinc.com:ip:axi_dynclk:1.1-17] /video_dynclkFREQ_HZ of 100000000 propagated into CONFIG.kRefClkFreqHz INFO: [digilentinc.com:ip:MIPI_CSI_2_RX:1.0-17] /MIPI_CSI_2_RX_0Verified that video_aclk frequency can handle RxByteClkHS frequency. AXI-Stream bandwidth 600000000 Pix/s >= PPI bandwidth 134400000.0 Pix/s INFO: [digilentinc.com:ip:MIPI_D_PHY_RX:1.0-17] /MIPI_D_PHY_RX_0FREQ_HZ of 50000000 propagated into CONFIG.C_S_AXI_LITE_FREQ_HZ INFO: [digilentinc.com:ip:MIPI_D_PHY_RX:1.0-17] /MIPI_D_PHY_RX_0FREQ_HZ of 200000000 propagated into CONFIG.kRefClkFreqHz INFO: [digilentinc.com:ip:MIPI_D_PHY_RX:1.0-17] /MIPI_D_PHY_RX_0FREQ_HZ of 84000000 propagated onto RxByteClkHS Wrote : <C:/DesignVivado/Zybo_Z7_Embedded_Vision_Demo2/proj/bd/system/system.bd> VHDL Output written to : C:/DesignVivado/Zybo_Z7_Embedded_Vision_Demo2/proj/bd/system/synth/system.vhd VHDL Output written to : C:/DesignVivado/Zybo_Z7_Embedded_Vision_Demo2/proj/bd/system/sim/system.vhd VHDL Output written to : C:/DesignVivado/Zybo_Z7_Embedded_Vision_Demo2/proj/bd/system/hdl/system_wrapper.vhd make_wrapper: Time (s): cpu = 00:00:08 ; elapsed = 00:00:08 . Memory (MB): peak = 1317.461 ; gain = 79.957 # set sdk_dir $origin_dir/sdk # set hw_list [glob -nocomplain $sdk_dir/*hw_platform*] # if {[llength $hw_list] != 0} { # foreach hw_plat $hw_list { # file delete -force $hw_plat # } # } # set sdk_list [glob -nocomplain $sdk_dir/*] # set sdk_list [lsearch -inline -all -not -exact $sdk_list "../sdk/.keep"] # if {[llength $sdk_list] != 0} { # exec xsct -eval "setws -switch ../sdk; importproject ../sdk" # } update_compile_order -fileset sources_1