Fraser

Members
  • Content Count

    2
  • Joined

  • Last visited

About Fraser

  • Rank
    Newbie

Recent Profile Visitors

The recent visitors block is disabled and is not being shown to other users.

  1. Thank you for the links and the info. But i probably should have put the commands down to show how i created the project. I thought i was suppose to reference the Petalinux-Zybo-Z7-20-2017.4-2.bsp to have the project properly set up. When i create the project using "petalinux-create --type project --template zynq --name foo --source Petalinux-Zybo-Z7-20-2017.4-2.bsp", I ultimately get the above error. If i don't source any bsp, it compiles, but doesn't boot the SD card. So i should not reference the Zybo bsp file on project creation as per ug1144 steps? As you can see i am VERY green... I appreciate your patience. thx
  2. Hi all, Disclaimer: I am a software guy that is a total newb to Zybo board and petalinux I've been trying forever to get my my project to build, and i keep getting the same errors. The vivado project is simply an autogenerated Zync system with a single PMOD iinterface. I've seen many tutorials for the Zed board that don't seem to have the build problems that the Zybo does. The following is the error i'm dealing with. Thank you in advance for the help! [INFO] building project [INFO] sourcing bitbake INFO: bitbake petalinux-user-image WARNING: Host distribution "LinuxMint-19.1" has not been validated with this version of the build system; you may possibly experience unexpected failures. It is recommended that you use a tested distribution. Loading cache: 100% |##########################################################################################################################################################################################################################| Time: 0:00:00 Loaded 3258 entries from dependency cache. Parsing recipes: 100% |########################################################################################################################################################################################################################| Time: 0:00:01 Parsing of 2473 .bb files complete (2430 cached, 43 parsed). 3266 targets, 226 skipped, 0 masked, 0 errors. NOTE: Resolving any missing task queue dependencies Initialising tasks: 100% |#####################################################################################################################################################################################################################| Time: 0:00:06 Checking sstate mirror object availability: 100% |#############################################################################################################################################################################################| Time: 0:00:16 NOTE: Executing SetScene Tasks NOTE: Executing RunQueue Tasks fsbl-2017.4+gitAUTOINC+77448ae629-r0 do_compile: NOTE: fsbl: compiling from external source tree /home/faddison/petalinux/tools/hsm/data/embeddedsw ERROR: device-tree-generation-xilinx+gitAUTOINC+3c7407f6f8-r0 do_compile: Function failed: do_compile (log file is located at /home/faddison/petalinux/beyond/build/tmp/work/plnx_arm-xilinx-linux-gnueabi/device-tree-generation/xilinx+gitAUTOINC+3c7407f6f8-r0/temp/log.do_compile.9166) ERROR: Logfile of failure stored in: /home/faddison/petalinux/beyond/build/tmp/work/plnx_arm-xilinx-linux-gnueabi/device-tree-generation/xilinx+gitAUTOINC+3c7407f6f8-r0/temp/log.do_compile.9166 Log data follows: | DEBUG: Executing shell function do_compile | Error: /home/faddison/petalinux/beyond/build/tmp/work/plnx_arm-xilinx-linux-gnueabi/device-tree-generation/xilinx+gitAUTOINC+3c7407f6f8-r0/system-user.dtsi:77.1-14 Label or path axi_dynclk_0 not found | Error: /home/faddison/petalinux/beyond/build/tmp/work/plnx_arm-xilinx-linux-gnueabi/device-tree-generation/xilinx+gitAUTOINC+3c7407f6f8-r0/system-user.dtsi:82.1-12 Label or path axi_vdma_1 not found | Error: /home/faddison/petalinux/beyond/build/tmp/work/plnx_arm-xilinx-linux-gnueabi/device-tree-generation/xilinx+gitAUTOINC+3c7407f6f8-r0/system-user.dtsi:85.1-10 Label or path v_tc_out not found | Error: /home/faddison/petalinux/beyond/build/tmp/work/plnx_arm-xilinx-linux-gnueabi/device-tree-generation/xilinx+gitAUTOINC+3c7407f6f8-r0/system-user.dtsi:91.1-9 Label or path v_tc_in not found | Error: /home/faddison/petalinux/beyond/build/tmp/work/plnx_arm-xilinx-linux-gnueabi/device-tree-generation/xilinx+gitAUTOINC+3c7407f6f8-r0/system-user.dtsi:94.1-12 Label or path axi_vdma_0 not found | Error: /home/faddison/petalinux/beyond/build/tmp/work/plnx_arm-xilinx-linux-gnueabi/device-tree-generation/xilinx+gitAUTOINC+3c7407f6f8-r0/system-user.dtsi:97.1-16 Label or path axi_gpio_video not found | Error: /home/faddison/petalinux/beyond/build/tmp/work/plnx_arm-xilinx-linux-gnueabi/device-tree-generation/xilinx+gitAUTOINC+3c7407f6f8-r0/system-user.dtsi:100.1-9 Label or path pwm_rgb not found | Error: /home/faddison/petalinux/beyond/build/tmp/work/plnx_arm-xilinx-linux-gnueabi/device-tree-generation/xilinx+gitAUTOINC+3c7407f6f8-r0/system-user.dtsi:139.1-15 Label or path axi_i2s_adi_0 not found | Error: /home/faddison/petalinux/beyond/build/tmp/work/plnx_arm-xilinx-linux-gnueabi/device-tree-generation/xilinx+gitAUTOINC+3c7407f6f8-r0/system-user.dtsi:155.1-14 Label or path axi_gpio_led not found | Error: /home/faddison/petalinux/beyond/build/tmp/work/plnx_arm-xilinx-linux-gnueabi/device-tree-generation/xilinx+gitAUTOINC+3c7407f6f8-r0/system-user.dtsi:160.1-17 Label or path axi_gpio_sw_btn not found | Error: /home/faddison/petalinux/beyond/build/tmp/work/plnx_arm-xilinx-linux-gnueabi/device-tree-generation/xilinx+gitAUTOINC+3c7407f6f8-r0/system-user.dtsi:164.1-14 Label or path axi_gpio_eth not found | Error: /home/faddison/petalinux/beyond/build/tmp/work/plnx_arm-xilinx-linux-gnueabi/device-tree-generation/xilinx+gitAUTOINC+3c7407f6f8-r0/system-user.dtsi:201.1-11 Label or path axi_iic_0 not found | Error: /home/faddison/petalinux/beyond/build/tmp/work/plnx_arm-xilinx-linux-gnueabi/device-tree-generation/xilinx+gitAUTOINC+3c7407f6f8-r0/system-user.dtsi:225.1-26 Label or path mipi_csi2_rx_subsystem_0 not found | Error: /home/faddison/petalinux/beyond/build/tmp/work/plnx_arm-xilinx-linux-gnueabi/device-tree-generation/xilinx+gitAUTOINC+3c7407f6f8-r0/system-user.dtsi:264.1-15 Label or path v_frmbuf_wr_0 not found | FATAL ERROR: Syntax error parsing input tree | WARNING: exit code 1 from a shell command. | ERROR: Function failed: do_compile (log file is located at /home/faddison/petalinux/beyond/build/tmp/work/plnx_arm-xilinx-linux-gnueabi/device-tree-generation/xilinx+gitAUTOINC+3c7407f6f8-r0/temp/log.do_compile.9166) ERROR: Task (/home/faddison/petalinux/components/yocto/source/arm/layers/meta-xilinx-tools/recipes-bsp/device-tree/device-tree-generation_git.bb:do_compile) failed with exit code '1' NOTE: Tasks Summary: Attempted 3306 tasks of which 2605 didn't need to be rerun and 1 failed. Summary: 1 task failed: /home/faddison/petalinux/components/yocto/source/arm/layers/meta-xilinx-tools/recipes-bsp/device-tree/device-tree-generation_git.bb:do_compile Summary: There was 1 WARNING message shown. Summary: There was 1 ERROR message shown, returning a non-zero exit code. ERROR: Failed to build project Is there a solid Zybo Petalinux "HOWTO" or tutorial for creating your own project that clearly shows how to get your own Vivado PMOD project and associated petalinux project to build properly??? It seems to me it shouldn't be this hard. All the of the Zed board tutorials seem to be much more straight forward....