Dom_123

Members
  • Content Count

    27
  • Joined

  • Last visited

About Dom_123

  • Rank
    Member

Recent Profile Visitors

The recent visitors block is disabled and is not being shown to other users.

  1. Dom_123

    basys 3 WiFi usage

    https://drive.google.com/file/d/18Qq-i30QLaWpy-GERYBjzVCD5taxFdHT/view?usp=sharing Try this as a link to downlaod my zipped file. Thanks, Dom.
  2. Dom_123

    basys 3 WiFi usage

    @JColvin, Okay so this is the device ID that is printed to the serial term, also the temp and humid readings have changed? thanks. Dom.
  3. Dom_123

    basys 3 WiFi usage

    Hi @JColvin, Good idea ill do that now and let you know what results i get! thanks, Dom.
  4. Dom_123

    basys 3 WiFi usage

    Hi JColvin, Would you like me to send in one of my fully completed projects that is printing the wrong/bad data? If so, please advise on how to do so as the zipped file is too large to send on this forum. thanks again, Dom.
  5. Dom_123

    basys 3 WiFi usage

    These block errors have only occurred when opening a design made by @jpeyron, when I create my own block designs i have no such errors. I do get the errors that are inevitable and because the Pmod IP's were created using another board but they are the only errors i receive when creating my own design and i understand they can be ignored? What i dont understand is why i am receiving any printed data at all? where does this data originate as it is clearly a loop that isn't accurate? Thanks, Dom.
  6. Dom_123

    basys 3 WiFi usage

    Hi @jpeyron, I have done this and unfortunately the data i receive is the same data I have always received. I now understand the block design errors thank you for explaining. Any other ideas as to what the issue could be? The BASYS is in jtag with both pullups shorted and in usb mode using the blue jumpers. The HYGRO is connected to the top 6 pins of the JB port. thanks, Dom.
  7. Hi, I am attempting to run the Wi-Fi scan example on the BASYS 3 using vivado 2018.3. I encounter this error within the DHCP.h file and the HeapMgr.h file (shown in screenshots). how can i fix these errors? Are my MicroBlaze drivers wrong as the error appears to originate from there? Kind Regards, Dom.
  8. Dom_123

    basys 3 WiFi usage

    Running the given file gives the same data as i have always received. These critical warnings appear when I load up the Block design, similar to warnings i had the last time i tried using one of your designs. Thoughts? Thanks, Dom.
  9. Dom_123

    basys 3 WiFi usage

    Out of interest, should the TX led be flashing to say that the fpga is transferring data? as only the RX led is flashing when the board is programmed. Dom.
  10. Dom_123

    basys 3 WiFi usage

    I have wrapped a metal wire around the jumper pins for the SDA on the HYGRO, reprogrammed the FPGA and re ran the main.c and the numbers printed to the serial haven't changed. Sorry for making this such a task, I know it should be straightforward. thanks again, Dom.
  11. Dom_123

    basys 3 WiFi usage

    Hi@jpeyron, I have moved a jumper from the Pmod HYGRO to the JTAG position as mentioned and the values are still the same. Will removing a JTAG from the HYGRO be detremental? thanks, Dom.
  12. Dom_123

    basys 3 WiFi usage

    @jpeyron Unfortunately it appears that this hasn't made a difference. This screenshot shows this. thanks, Dom.
  13. Dom_123

    basys 3 WiFi usage

    @jpeyron, The Main.c file used is the exact same file provided in the example with absolutely no changes. I am using default programming settings when i program the FPGA. I am also using the run as launch on hardware (system debugger). I am not changing any of the SDK settings. I am using windows 10, will that make any difference? I have attached a screenshot of the project explore window. thanks, Dom.
  14. Dom_123

    basys 3 WiFi usage

    Hi @jpeyron, I am not changing any of the other MicroBlaze IP settings no, aside from local memory to 128kb. Also the SDK file is to large to share even when zipped. how else can i share this file with you? Other files/pictures are below Thanks, Dom. design_1_wrapper.v
  15. Dom_123

    basys 3 WiFi usage

    **** Wrong library proof file.... should be this SC instead. Dom.