Popular Content

Showing content with the highest reputation on 03/19/20 in all areas

  1. 1 point
    Hi everyone, LINX can be installed on the Raspberry Pi 4. The LINX 3.0 Target Manual Install Process (https://www.labviewmakerhub.com/doku.php?id=learn:libraries:linx:misc:target-manual-install) did not work due to changes in the latest version of Raspbian. Here is the procedure that I used to install LINX. The procedure also works on the Raspberry Pi 2B, Pi 3A+, Pi 3B and Pi 3B+ running Raspbian Buster. 1. Setup the Raspberry Pi using the latest Raspbian Buster Image. 2. Change the default password for the Pi account on the Raspberry Pi. 3. Setup a WiFi or Ethernet connection from the Raspberry Pi to your router. 4. Enable SSH on the Raspberry Pi. 5. SSH into the Raspberry Pi or open a terminal window on the Raspberry Pi desktop. 6. Check that the Raspberry Pi can access the Internet by entering the command ping -c 4 raspberrypi.org 7. Enter the commands shown in bold below. Note: The text may wrap due to the web browser window size. I recommend copying the text into a text editor to see the original formatting. The commands are in the attached file linx_install_commands.txt # Enable i2c and spi sudo raspi-config nonint do_i2c 0 sudo raspi-config nonint do_spi 0 # Update Raspbian sudo apt-get update sudo apt-get dist-upgrade -y # Install LINX sudo sh -c 'echo "deb [trusted=yes] http://feeds.labviewmakerhub.com/debian/ binary/" >> /etc/apt/sources.list' sudo apt-get update sudo apt-get install -y lvrt-schroot # Move the nisysserver.service and labview.service files to the systemctl folder sudo mv /etc/systemd/system/multi-user.target.wants/nisysserver.service /lib/systemd/system sudo mv /etc/systemd/system/multi-user.target.wants/labview.service /lib/systemd/system # link liblinxdevice.so to the Raspberry PI device driver file liblinxdevice_rpi2.so sudo schroot -c labview -d /usr/lib -- ln -s liblinxdevice_rpi2.so liblinxdevice.so # Enable the nisysserver.service and labview.service to start on boot sudo systemctl enable nisysserver.service sudo systemctl enable labview.service # Start the nisysserver.service and labview.service sudo systemctl start nisysserver.service sudo systemctl start labview.service You should now be able to connect to the Raspberry Pi from the LabVIEW Project Explorer. Cheers, Andy. linx_install_commands.txt
  2. 1 point

    Micro USB port (J4) not working in Basys3

    Hi @Sebanti, The plates being uneven on the micro USB slot is okay; what I was looking for and what I see is that the small tab containing the contacts for the data and power lines for USB itself has been bent downward, indicating that a USB cable was plugged in upside down. Luckily, this tab can usually be bent back upward to get the board working; the micro usb cable then needs to be attached such that the two tabs are pointing skyward. I have attached some images showing what I am referring to. You can bend the tab upwards with a very small flathead screwdriver or something like the metal contact on a breadboard jumper cable. Let me know if you have any questions about this. Thanks, JColvin
  3. 1 point

    Basys 3 not turning on

    Please be sure to insert the USB cable in the proper way. From your picture it seems to me that the cable might be inserted in the wrong way.