Leaderboard


Popular Content

Showing content with the highest reputation since 11/02/18 in all areas

  1. 3 points
    Ciprian

    Digital Twin

    Hi @Kris Persyn, It depends on how you manage your resources, driving immersive visuals on a HDMI display can be done in multiple ways at different resolutions, some are PL taxing others are DDR taxing; you could generate entire frame buffers in PL or PS or you could find a optimal algorithm to change just the previous frame or you could allocate a high number of frame buffers and then run them in a loop. It also depends on how math lab synthesizes the IP you will need to add to your design. If you design your project properly and don't aim for a resolution higher more 720p( I'm being conservative, we managed to drive the HDMI at 1080p with processing filters without a problem) I think it should be enough for what you want to do, resource wise. My suggestion, download and install Vivado, download and install the board files, create and implement your project look at the resource consumption and then buy a board. - Ciprian
  2. 3 points
    In your constraint file, the ddc pins have lowercase "ddc_scl_io" and "ddc_sda_io". Your block design has the port in uppercase "DDC". The case must match. Try editing your constraint file to have "DDC_scl_io" and "DDC_sda_io".
  3. 3 points
    jpeyron

    pmod wifi

    Hi @harika, I believe the HTML web page error is related to the materials on the SD card. 1) Please attach a screen shot of the contents of the Sd card you are using. 2) Please follow the YouTube video here from about 6 minutes and 28 seconds on for how to set up the HTTP server project. Make sure to update the login an password for the router/modem you are using. thank you, Jon
  4. 2 points
    SeanS

    Genesys 2 DDR Constraints

    Hi JColvin, I am definitely not using ISE. I think JPeyron had it correctly. I didn't have my board.Repopaths variable set and so the project wasn't finding the board files. Once I set this variable as suggested, the pin mapping and IO types were auto populated as expected. Kudos, Sean
  5. 2 points
    @jpeyron @D@n I fixed the bug in my SPI Flash controller design. Now I can read from Flash memory.
  6. 2 points
    Hi @Blake, I was struggling with the same problem. In Adam's project is mistake which result is an FMC-HDMI module is not recognizable by other devices. The reason for that is not sending EDID at all. The cause of this situation is wrong initialized EDID map. In Adams example EDID is initialized by: but the correct way is: the body of iic_write2 is from LK example: By the way, in LucasKandle example initialization is done in same way as in Adam's example so is the reason why it not worked in your case. I hope it will helps. If you want I will post my working code for a ZedBoard with FMC-HDMI when I clean it because at the moment is kind of messy.
  7. 2 points
    Hi, there's a lot of new information in your last post. You aren't just "trying" FPGA but have a professional interest in Zynq. Don't let anybody scare you it's "difficult" and go for it, possibly with the cheapest board, no tutorials and low expectations like, blinking LEDs for quite a while. Given the price tag of any industrial training coarse, an FPGA board for self-study is a no-brainer. Maybe save some money to buy your FPGA engineer a coffee once a week, with some questions in mind
  8. 2 points
    True. Zygot believes that making you work for knowledge is kinder than giving you solutions that can be used to mindlessly resolve your problem of the hour.... it's just a different philosophical bent...
  9. 2 points
    kwilber

    Pmod DA3 clocking

    It looks to me like DA3_WriteSpi() was adapted from code for a different device and has vestigial and incorrect code. Reviewing the AD5541A datasheet, several things stand out There is only a single register in the chip so there is no need for the u8 reg parameter. There is no need for a"config byte" to be sent before the data. The transfer is always 16 bits so there is no need to allow for arbitrary length data quoting from the datasheet "Input data is framed by the chip select input, CS. After a high-to-low transition on CS, data is shifted synchronously and latched into the serial input register on the rising edge of the serial clock, SCLK. After 16 data bits have been loaded into the serial input register, a low-to-high transition on CS transfers the contents of the shift register to the DAC register if LDAC is held low". Reviewing the PmodDA3 schematic, the ~LDAC signal is softly pulled to ground with a 10K resistor. So there is no need to explicitly toggle ~LDAC. What all this means is DA3_WriteSpi could be simplified to something like void DA3_WriteSpi(PmodDA3 *InstancePtr, u16 wData) { u8 bytearray[2]; bytearray[0] = ((wData & 0xFF00) >> 8); bytearray[1] = (wData & 0xFF); XSpi_Transfer(&InstancePtr->DA3Spi, bytearray, 0, sizeof(bytearray)); } You would then call it passing in just the instance pointer and the value you want to write to the DAC. u16 dacValue = 1234; DA3_WriteSpi(&myDevice, dacValue); I do not have a PmodDA3 on my bench so I cannot verify the function works, You can give it a try and let us know how it goes.
  10. 2 points
    JColvin

    Pin Mapping for JTAG-SMT3-NC

    Hi @RussGlover, I apologize for the delay; the details you are looking are as follows: TCK - ADBUS0 TDI - ADBUS1 TDO - ADBUS2 TMS - ADBUS3 OEJTAG - ADBUS7 OESRSTN - ACBUS4 Let me know if you have any more questions. Thanks, JColvin
  11. 2 points
    kwilber

    Pmod DA3 clocking

    It seems to me the AXI Quad SPI block is sending address + data. Looking at the .xci file again, I see C_SPI_MEM_ADDR_BITS set to 24 bits. So 24 bits of address and 16 bits of data would yield 40 bits.
  12. 2 points
    kwilber

    Pmod DA3 Pinout

    That is one of the conventions commonly used to indicate an Active Low signal. So in this case, you pull Chip Select low when you want to access the chip. After you have toggled in all the data bits on the DIN line, you pull LDAC low. The Pmod DA3 reference manual has a link to the D/A chip's datasheet. That is the best first place to look for information on the device's function. The required signal timings are on page 5 of the datasheet.
  13. 2 points
    @Ahmed Alfadhel If you installed Vivado then you also installed the Xilinx Document Navigator. If you are serious about developing with FPGA devices you need to know how to find and access the plethora of documents that your vendor provides in order to use their devices properly. Check the box for 7 Series devices to see the list of reference manuals, User's Guides, Datasheets etc. From there you can add all relevant documents to your search and keep up to date. Do the same for ISE or Vivado tools. This is where everyone needs to start their Xilinx FPGA journey. Xilinx makes it easier than other FPGA vendors to obtain knowledge.
  14. 2 points
    The hot plug detect should be on the rx side. The source will see that and will then initiate the DDC conversation.
  15. 2 points
    The answer is yes, that fixed it! Thank you so much! The odd thing is that I tried this in one of my attempts and put it back to QSPI as it didnt work. Regardless thank you so very much for walking me through this. all looks good now:
  16. 2 points
    So the picture that you post of a (relatively) gigantic scope probe clip resting on a fairly small FPGA device in a BGA package is a way of making a statement. It might also be viewed as a picture that might be making a statement to you. I routinely use an LED to verify that my design is at least being clocked properly. Make a 32-bit counter and connect bit 26 or so to an obuf driving one of the boards LEDs. You can get an approximation of a 1 blink/s LED rate with a little math depending on the clock rate and the chosen counter bit. For me the clock rate of interest isn't the external clock coming into the FPGA but some clock output of an MMCM or PLL that I'm using for my design. If the LED is blinking then I at least know that something is alive in my design. You've got to be careful with those large scope probe grabbers around fine pitch components. I prefer to bring out a few debug versions of particular signals of interest to a PMOD and connect that to a scope probe ( the PMOD has DGND pin(s) ). You still have to exercise some caution with the ground clip on your scope probe as it's easy to short an adjacent pin to ground and ruin your day. It would be very useful if Digilent provided GND test points, or at least holes for test points, in an area of their boards for scope probing. The safest thing might be to stick a pin into the GND receptacle of one PMOD connector and probe on signals in another. Insulation stripped off suitably sized wires can help as well to keep ground clips from accidents. It's really easy to have that ground clip pop off whatever it's connect to and bounce around on exposed parts of your board; nothing good will come of that. I limit scope probing to when it's necessary. There are usually safer ways to evaluate signals in your FPGA design. Lastly, you should understand that its very easy to get a false impression of what a signal looks like, especially with normal scope probe ground clips. Think Heisenberg.
  17. 2 points
    Ciprian

    Hdmi out from zybo

    Try adding this: &i2c0 { clock-frequency = <100000>; status = "okay"; }; Here: <petalinux_project>/project-spec/meta-user/recipes-bsp/device-tree/files/system-user.dtsi -Ciprian
  18. 2 points
    xc6lx45

    Cmod S6 - Multilayer?

    You might go to Texas Instruments' site (or AD or both) and find documentation for some $500 high frequency ADC or DAC eval board as example to study.. There's nothing wrong with copper planes, generally. Free-standing structures (such as non-connected filler polygons) can be bad, if they resonate. So are loops if the driving wire spans an area together with the GND return wire (for which the ground plane is an obvious solution). The worst resonators have high quality factor meaning loose coupling meaning it can be surprising how the energy managed to couple in. There's no such thing as too many ground vias... Note, your ground plane can do very interesting things in combination with the metal box it's in (resonant cavity) but that's a different story.
  19. 2 points
    The warning you pasted is benign and simply means there are no ILAs present in your design. The real issue could be your clock. You should review the datasheet for the dvi2rgb.Table 1 in section 5 specifies RefClk is supposed to be 200Mhz. Also, your constraint should follow the recommendation in section 6.1 for a 720p design. Finally, @elodg gives some great troubleshooting information in this thread.
  20. 2 points
    And.... I have this sense that if you keep describing what you did you will answer your own question. I don't have enough information yet to help. [I confess that I haven't bothered to read through your code] Verbalizing problems, if you go into enough detail, is often a fairly reliably way to resolve them. Sometimes it helps to have someone throw in a good question or two.
  21. 2 points
    zygot

    Cmod S6 - Multilayer?

    Consider that the FPGA on your module has 196 balls. The A7 versions have 236. You can answer your own question by thinking about how one gets all of those surface mount pads to ground, voltage and signal traces.
  22. 2 points
    You are not wrong - but for that device ID the tooling will not let you use all the LUTs present on the silicon die. It is a somewhat artificial restriction, and might have some implications for the power and thermal properties of the package (e.g. a smaller package may not be able to dissipate the heat).
  23. 2 points
    Hi, Abdul, Here are my notes/recommendations: 1. Open your block diagram in Vivado where you created BRAM configuration and then check the address editor. You should see whether the BRAM address was assigned. If you find assigned see axi_bram_ctrl_0 OffsetAdress and the Range then the BRAM was created and mapped to the memory. 2. Writing and reading from BRAM requires a clock signal. Check Xilinx templates for BRAM which you can access inside the Vivado. I am not sure that the code you've used to write into BRAM does anything. 3. You don't use an absolute address in your HDL when BRAM created in Vivado. Vivado maps the address 0x4000_0000 to 0. So you can start from the address 0 and it will be the lowest address of the BRAM. If your don't use Vivado then you will need to define your block in HDL and include addresses, and many other parameters. 4. The C-code in SDK should use BRAM address from the file parameters.h. You just need to use XPAR_AXI_BRAM_CTRL_0_S_AXI_BASEADDR as the begining of the BRAM address space. 5. You can treat BRAM as RAM meaning that all read/write operators are the same. For example you can copy BRAM content into the RAM: for(i = 0 ; i < BRAM_SIZE ; i++) *(destination + i) = *(source + i); where source = XPAR_AXI_BRAM_CTRL_0_S_AXI_BASEADDR Disclaimer: always read documentation, whatever you find on Internet might not be correct. Good luck!
  24. 2 points
    Hi @akhilahmed, In the mentioned video tutorial, the leds are controlled using "xgpio.h" library but the application is standalone. If you want to use a linux based application you have to use linux drivers for controlling. In the current Petalinux build, which is used in SDSoC platform, UIO driver is the best approach. Steps: 1. Vivado project generation: - Extract .dsa archive from /path_to_sdsoc_platform/zybo_z7_20/hw/zybo_z7_20.dsa - Launch Vivado - In Tcl Console: cd /path_to_extracted_dsa/prj - In Tcl Console: source rebuild.tcl - In this point you should have the vivado project which is the hardware component of SDSoC platform. Open Block Design. Change to Address Editor Tab. Here you will find the address for axi_gpio_led IP: 0x4122_0000 2. Petalinux UIO driver: - Launch SDx - Import zybo-z7-20 SDSoC platform - Create a new SDx linux based project using a sample application (e.g. array_zero_copy) - Build the project - Copy the files from /Dubug/sd_card to SD card - Plug the SD card in Zybo Z7. Make sure that the JP5 is set in SD position. Turn on the baord - Use your favorite serial terminal to interact with the board (115200, 8 data bits, 2 stop bits, none parity) - cd to /sys/class/uio - if you run ls you will get something like: uio0 uio1 uio2 uio3 uio4 uio5 - Now you have to iterate through all these directories and to search for the above mentioned axi_gpio_led address: 0x4122_0000 - For example: cat uio0/maps/map0/addr will output: 0x41220000, which means that the axi_gpio_led can be accessed using linux uio driver through uio0 device. - Code: #include <stdio.h> #include <stdlib.h> #include <sys/ioctl.h> #include <sys/mman.h> #include <stdint.h> #include <unistd.h> #include <fcntl.h> #define UIO_MEM_SIZE 65536 #define UIO_LED_PATH "/dev/uio0" void UioWrite32(uint8_t *uioMem, unsigned int offset, uint32_t data) { *((uint32_t*) (uioMem+offset)) = data; } uint32_t UioRead32(uint8_t *uioMem, unsigned int offset) { return *((uint32_t*) (uioMem+offset)); } void led_count_down(uint8_t *ledMem) { uint8_t count = 0xF; uint8_t index = 0; for (index = 0; index < 5; index++) { UioWrite32(ledMem, 0, count); count = count >> 1; sleep(1); } } int main() { // Set Leds as output int led_fd = open(UIO_LED_PATH, O_RDWR); uint8_t *ledMem = (uint8_t *) mmap( 0, UIO_MEM_SIZE, PROT_READ | PROT_WRITE, MAP_SHARED, led_fd, (off_t)0); UioWrite32(ledMem, 4, 0x0); // Set all leds as output while(1) { // Start led count-down led_count_down(ledMem); } return 0; } - Build the project and copy the content of Debug/sd_card on SD sd_card - Power on the board and connect to it using a serial terminal - run the following commands: mount mmcblk0p1 /mnt cd /mnt ./project_name.elf - Result: A countdown should be displayed on leds.
  25. 2 points
    Hi @Ben B, Regarding your question on using Zybo Z7-20 to capture HDMI signals. It is possible and using UIO is also an option, but because we are using the VDMA to get the Video signal it's better to use a DMA driver. Unfortunately Xilinx does not provide a complete DMA driver for any of their DMA IPs, therefore I have been using this DMA driver which includes the VDMA functionality as well. To make things as easy as possible, I generated a example project for you with the VDMA used to capture video streams and OpenCV functions to write a *.bmp file. What you need to do in order to get it working is: 1. load the HDMI2BMP.elf to /home/root on your rootfs portion of your board 2. after the board boots you need to load the axi_dma_driver root@Zybo-Z7-20:~# insmod /lib/modules/4.9.0-xilinx-v2017.4/extra/xilinx-axidma.ko 3. run the HDMI2BMP.elf This will generate a test.bmp in /home/root with the captured image. The source file for the app is in the SDK folder. Changes which I had to do to the original petalinux project are: - create a new module in petalinux petalinux-create -t modules -n xilinx-axidma --enable - copy the necessary file to Petalinux-Zybo-Z7-20/Zybo-Z7-20/project-spec/meta-user/recipes-modules/xilinx-axidma/files and update the MAKE file and the xilinx-axidma.bb - update the system-user.dtsi in /Petalinux-Zybo-Z7-20/Zybo-Z7-20/project-spec/meta-user/recipes-bsp/device-tree/files - write the demo program Hope this helps. -Ciprian Zybo-Z7-20-HDMI-RX_peta.zip
  26. 2 points
    >> having about 60uF of ceramic decoupling goodness Maybe it's even more a question of ESR than capacitance. Ceramic if money doesn't matter (e.g. Mouser: 22 µF: €4..6). The typical solution are staggered capacitors, with a quick look at the datasheet for the self resonance frequency in the impedance curve. I do this for RF (try to get a quality short at n GHz...) but if I had to make a blind guess, I'd use two orders of magnitude, e.g. 10 µ, 100n, 1n and with a nervous glance at my Voodoo doll, 10p. The CMOD A7 is reported quite frequently (possibly because it's one of the most attractive boards) but I can tell that I've run into the same issues with FTDI's reference module for the 2232H. The chip just shuts down if it doesn't like what it sees on VCC. It took a long Friday night in the lab to prove without doubt that our system is sensitive to USB cables. We changed the design and shipped with non-detachable cable. Zero issues so far.
  27. 2 points
    HI @yottabyte, I realize (based on the time stamps) that you figured out the answer to your question before you got a response, but do you mind posting your original question and what you found out so any future users with a similar question would be able to see the answer you (and xc6lx45) found out? Thanks, JColvin
  28. 2 points
    xc6lx45

    Voice-activited

    >> Is that solution Will run? I suspect you mean crosscorrelation, and no, it will most likely not work. Maybe you'll save yourself much pain if you prototype the algorithm first in software. It doesn't need to be real time. E.g. get freeware Octave and use the audioread() function. Be sure to use two independent recordings for reference and simulated microphone input.
  29. 2 points
    You're welcome! I am glad it is working. Yes, this thread should help others trying to run the Pcam 5C demo on Zybo Z7. Best Regards, Ionut.
  30. 2 points
    attila

    AD2 over voltage :-(

    Hi @peter taylor This was a ferrite between the Analog Discovery and USB ground. Supposed to filter noise from USB cable/PC which acted as a fuse... You can solder a simple short instead this ferrite. Hopefully only this was damaged. Be careful. The devices and circuits should have the same ground. The AD ground is connected to the PC ground over the USB cable.
  31. 2 points
    Flux

    VGA Pmod Tutorials

    The VGA tutorials have been updated with support for the Basys 3 and Nexys Video as well as Arty: https://timetoexplore.net/blog/arty-fpga-vga-verilog-01 I'm currently adding SVGA (800x600) support as well as working on more advanced effects. All the Verilog is available under the MIT license on GitHub: github.com/WillGreen/timetoexplore I look forward to sharing more projects with the community soon. Will
  32. 2 points
    elodg

    Nexys Video "Feet"

    https://www.fastenal.com/products/details/0146057 https://www.fastenal.com/products/details/28783
  33. 2 points
    Ciprian

    Zynq book - tutorial 5 Zybo Z7

    Hi @n3wbie, Th working project is attached. what you have to take in to account when using this audio codecs with Digilent products is that you need to configure the codec (using I2C) as well as receive the samples using I2S IP core. Basically one is for the control of the codec and the other one is to receive the samples. I have written a small driver for both the I2S core and the I2C SSM2603 which is in the source files of the SDK project (in the sdk folder) which configures the registers for the codec and I2S IP core; the documentation for the codec can be found here. The IP core has not yet been documented which is the main reason we have not added it to the Digilent vivado-ip library, but it needs a 100MHz input for it to be able to synthesize the 12.228 MHz MCLK and the subsequent clocks for the I2S protocol. The demo project reads the buttons and based on the ones you press it will: BTN0 - Record 1s BTN1 - Set Mic input BTN2 - Set Line In input BTN3 - Playback 1s The project is not really optimized so it uses a variable "RecSamples", allocated to the stack memory which holds the recorded samples(48000 samples representing 1s at a 48KHz sampling rate) and it is also used fro play back, so don't press play back before record. The rest should be easily traceable from the comments in the driver and the main source code. If you have any other questions feel fr to ask. Ciprian ZyboZ7Audio.zip
  34. 2 points
    JColvin

    Arty A7 flash chip

    Hi @D@n, I believe the new part that is used in the Arty A7 boards (and other A7 boards) is now a Spansion S25FL128SAGMF100; based on old schematics, I believe this was added in Rev D of the Arty A7 (dated August 2017), though I do not know when that particular Rev was then released (or if it even was released) to the public. I confirmed that the Arty S7 also uses this part and I wouldn't be surprised if most of our other Artix 7 based boards use it now as well. I've requested that the chip name and images are updated in any appropriate tutorials and requested that the pdf version of the reference manual (updated wiki) is updated as well. Thanks, JColvin
  35. 2 points
    xc6lx45

    Diving in

    ... a slightly longer answer, if anybody is interested (analog mixing with square wave LO): One way is to look at the Fourier series of the square wave as a sum of sines at frequencies f, 3f, 5f, 7f, ... and to a lesser extent 2f, 4f, 6f from implementation imperfections. Then think of the mixer as linear multiplier, and use superposition (the distributive property of multiplication) for a*(b3+b5+b7+...) = a*b3+a*b5+a*b7+... Hint, if anybody wants to formally go through the math, it gets much less messy with cos(x) = (exp(ix)+exp(-ix))/2 aka DeMoivre. So you really get multiple frequency translations instead of one. What remains to be done is to manage the input signal energy at those frequencies I don't want, with a filter or narrow-band antenna. In the digital world, you'd always use a sine wave.
  36. 2 points
    attila

    WaveForms beta download

    3.11.4 digilent.waveforms_beta_v3.11.4_64bit.exe Added: - Scope: - set/reset zero offset in each channel option - precision option for measurements Fixed: - Script: access to traces and channels from Instrument.Export - unit conversions V to Ṽ, A to à - I2S 32 bit data 3.11.3 digilent.waveforms_beta_v3.11.3_64bit.exe digilent.waveforms_beta_3.11.3_amd64.deb digilent.waveforms_beta_3.11.3.x86_64.rpm Fixes 3.11.2 digilent.waveforms_beta_v3.11.2_64bit.exe digilent.waveforms_beta_3.11.2_amd64.deb digilent.waveforms_beta_3.11.2.x86_64.rpm Added: - Spectrum, Network and Impedance Analyzer store time data when this view is open Fixed: - runscript argument - loading of docked views geometry 3.11.1 digilent.waveforms_beta_v3.11.1_64bit.exe digilent.waveforms_beta_3.11.1_amd64.deb digilent.waveforms_beta_3.11.1.x86_64.rpm Added: - Scope: out of range warning in measurements - Protocol/UART: - support up to 32bit/word - TX/RX format: text, binary, decimal, hex - Wheel Direction option - Logic Analyzer: option to swap previous/next events - Spectrum Analyzer: allowing higher number of BINs for CZT 3.10.7 digilent.waveforms_beta_v3.10.7_64bit.exe Added: - Spectrum: logarithmic magnitude scale for voltage units - Protocol: datetime stamp for SPI/I2C Spy Fixes 3.10.6 digilent.waveforms_beta_v3.10.6_64bit.exe Added: - Scope - access to digital channels from custom mathematic channels - digital measurements view Fixes 3.10.5 digilent.waveforms_beta_v3.10.5_64bit.exe digilent.waveforms_beta_3.10.5_amd64.deb digilent.waveforms_beta_3.10.5.x86_64.rpm Added: - Power Supplies for AD2: tracking, slider, min/max - Logic Analyzer: Measurements - Impedance Analyze: DC mode compensation - SDK VB wrapper, C# wrapper updated Fixed: - EExplorer Wavegen AM/FM index precision for sine 3.10.4 digilent.waveforms_beta_v3.10.4_64bit.exe Fixed: - decimal resolution in Export, Data and Event views 3.10.3 digilent.waveforms_beta_v3.10.3_64bit.exe digilent.waveforms_beta_v3.10.3.dmg digilent.waveforms_beta_3.10.3_amd64.deb digilent.waveforms_beta_3.10.3.x86_64.rpm Added: - UART format option (binary, decimal...) - SDK I2C without clock stretching - SDK examples: Digital_I2c_PmodAcl.py, Digital_I2c_PmodGyro.py - Spectrum Analyzer THDN measurement, THDp and THDNp in percentage units - Impedance Analyzer: - constant current, voltage, custom script for amplitude and resistance control - Option to disable mouse drag and wheel operations on plots - Impedance/Network Analyzer: averaging time - Wavegen: extended frequency option Changed: - special values (none, off) moved to end of the preset list 3.10.2 digilent.waveforms_beta_v3.10.2_64bit.exe digilent.waveforms_beta_v3.10.2_32bit.exe digilent.waveforms_beta_v3.10.2.dmg digilent.waveforms_beta_v3.10.2_mavericks.dmg digilent.waveforms_beta_3.10.2_amd64.deb digilent.waveforms_beta_3.10.2_i386.deb digilent.waveforms_beta_3.10.2.x86_64.rpm digilent.waveforms_beta_3.10.2.i686.rpm Added: - Impedance Analyzer - voltage, current and custom plots - edit Meter list - Resistance mode for Meter, Frequency DC option - step mode in Time view - Netowrk Analyzer - step mode in Time and FFT views - amplitude table and custom function Fixed: - Help minor fix - Protocol SPI and I2C Sensor rate improvement - StaticIO button lock 3.8.22 digilent.waveforms_beta_v3.8.22_64bit.exe digilent.waveforms_beta_v3.8.22_32bit.exe Added: - Impedance differential setup, W1-C1P-DUT-C1N-C2-R-GND 3.8.21 digilent.waveforms_beta_v3.8.21_64bit.exe digilent.waveforms_beta_v3.8.21_32bit.exe digilent.waveforms_beta_v3.8.21.dmg digilent.waveforms_beta_3.8.21_amd64.deb digilent.waveforms_beta_3.8.21_i386.deb digilent.waveforms_beta_3.8.21.x86_64.rpm digilent.waveforms_beta_3.8.21.i686.rpm Added: - data property for impedance/network channels. - Impedance.Resistor.reference property - instruments accessible without index in Script tool like Scope. Fixes... 3.8.20 digilent.waveforms_beta_v3.8.20_64bit.exe Added: - Logger function access to other channels value, average, min, max - Script access to Logger channel set data property, getting average, minimum, maximum Fixed: - Logger Show/Maximum - Script Protocol.I2C.Clear() function 3.8.18 digilent.waveforms_beta_v3.8.18_64bit.exe digilent.waveforms_beta_v3.8.18_32bit.exe digilent.waveforms_beta_v3.8.18.dmg Added: - Network Analyzer - logarithmic scale and percentage unit - spectrum measurements: Carrier, THD+N, THD, HD# - FFT view - Averaging option 3.8.17 digilent.waveforms_beta_v3.8.17_64bit.exe digilent.waveforms_beta_v3.8.17_32bit.exe digilent.waveforms_beta_v3.8.17.dmg digilent.waveforms_beta_3.8.17_amd64.deb digilent.waveforms_beta_3.8.17_i386.deb digilent.waveforms_beta_3.8.17.x86_64.rpm digilent.waveforms_beta_3.8.17.i686.rpm Added: - Scope - persistence support for smooth curve and min/max sampling - custom math - current value in custom math function, can be used for averaging - initialization code for integration purposes - examples - unit presets for: ohm, degree, VAC, AAC - Spectrum - Import/Export samples for Traces - trace information option - Range option to adjust all the scope input ranges - Network and Spectrum - Script support for set magnitude property - Step size and steps per decade settings - Network Analyzer - custom plots: THD, HD2, HD3 - Protocol - I2C/Spy glitch filter based on frequency setting - Device options - On Close: Run (keep running), Stop, Shutdown - USB Power: Always ON or Stop with AUX for AD2 - USB Limit: USB current limitation AD1,2 - Audio Output: AD1, 2 - WaveForms SDK FDwfParamSet/Get, FDwfDeviceParamSet/Get - DwfParamOnClose, DwfParamUsbPower, DwfParamLedBrightness, DwfParamAudioOut, DwfParamUsbLimit - Notes toolbar show/hide option - on/off icon for toggle buttons: supply enable, network analyzer reference... - show entire capture button Changed: - renewed mouse wheel, drag and key (left,right,up,down) operation on plots and axis Fixed: - EExplorer output glitch during first device connection - NI VI crash when initializing without device connected - Scope XY plot 3.8.11 digilent.waveforms_v3.8.11_64bit.exe digilent.waveforms_v3.8.11_32bit.exe digilent.waveforms_v3.8.11.dmg digilent.waveforms_3.8.11_amd64.deb digilent.waveforms_3.8.11_i386.deb digilent.waveforms_3.8.11.x86_64.rpm digilent.waveforms_3.8.11.i686.rpm Added: - Digital Discovery: - LED brightness option - Logic Analyzer - ASCII format for: Bus, SPI, I2C, I2S - Format option for I2C - Logic Analyzer and Patterns - Line Color option - Protocol - Format option for SPI and I2C: Hexadecimal, Decimal, Binary, ASCII - Plot Width option in application settings Changed: - drawing quality improvement for thicker lines - color dialog buttons renamed to Close and Reset 3.8.9 digilent.waveforms_v3.8.9_64bit.exe digilent.waveforms_v3.8.9_32bit.exe digilent.waveforms_v3.8.9.dmg digilent.waveforms_3.8.9_amd64.deb digilent.waveforms_3.8.9_i386.deb digilent.waveforms_3.8.9.x86_64.rpm digilent.waveforms_3.8.9.i686.rpm Added: - WF/Settings/Options: Locale with System or English US regional option, export and import options - SDK: FDwfParamSet/Get function - Scope: measurement resolution Fixed: - minor issues 3.8.8 digilent.waveforms_v3.8.8_64bit.exe digilent.waveforms_v3.8.8_32bit.exe digilent.waveforms_v3.8.8.dmg Added: - WF SDK: - examples updated to be Python v3 compatible - FDwfAnalogImpedance functions for impedance/network analysis - Protocol: CAN receiver filter by ID - Impedance: Export information about amplitude and offset Fixed: - WF SDK: FDwfDigitalSpi functions read MISO/RX 3.8.7 digilent.waveforms_v3.8.7_64bit.exe Fixed: - Scope: save/load of coefficients for custom Math channel filter 3.8.6 digilent.waveforms_v3.8.6_64bit.exe digilent.waveforms_3.8.6_amd64.deb Added: - Export: Wavegen and Supplies information added to Scope, Spectrum, Impedance, Network export comments Fixed: - Script Tool.exec timeout - CAN high polarity option in Protocol tool and WF SDK 3.8.5 digilent.waveforms_v3.8.5_64bit.exe Added - Script functions: getSaveFile, getOpenFile, getDirectory - Scope: multiple scales, zero offset - Notes view - Export options: notes, header as comment - Help tab: floating/undock option, find with highlight Fixed: - Impedance Analyzer frequency scale in export 3.7.22 digilent.waveforms_v3.7.22_64bit.exe digilent.waveforms_v3.7.22_32bit.exe digilent.waveforms_v3.7.22.dmg digilent.waveforms_3.7.22_amd64.deb digilent.waveforms_3.7.22_i386.deb digilent.waveforms_3.7.22.x86_64.rpm digilent.waveforms_3.7.22.i686.rpm Added - Scope/Logic View/Logging picture format - Script: - Export function for instruments - access to Protocol/UART/RX using Receiver, Receive and ReceiveArray functions, SendArray Fixed - Scope edge trigger position for all devices, when only one or two samples are above the threshold - other minor fixes 3.7.21 digilent.waveforms_v3.7.21_64bit.exe digilent.waveforms_v3.7.21_32bit.exe digilent.waveforms_3.7.21_amd64.deb digilent.waveforms_3.7.21_i386.deb digilent.waveforms_3.7.21.x86_64.rpm digilent.waveforms_3.7.21.i686.rpm Added - Wavegen dynamic configuration, adjustments without restarting the generator - SDK support for CAN bus TX, RX - more detail in Spectrum, Network and Impedance Analyzer export comments - import data orientation option Fixed - Network Analyzer Meter export and copy - Data Logger quick measurements - other fixes and optimizations 3.7.19 digilent.waveforms_v3.7.19-2_64bit.exe digilent.waveforms_v3.7.19-2_32bit.exe digilent.waveforms_v3.7.19.dmg digilent.waveforms_3.7.19-2_amd64.deb digilent.waveforms_3.7.19-2_i386.deb digilent.waveforms_3.7.19-2.x86_64.rpm digilent.waveforms_3.7.19-2.i686.rpm Added: - Logic I2S Show channel option - SDK functions for UART, SPI, I2C master and UART receiver Changed: - OS-X rollback to FTDI driver 1.2.2 Fixed: - Impedance Analyzer: save/load of views positions - other fixes and optimizations 3.7.15 digilent.waveforms_v3.7.15_64bit.exe digilent.waveforms_v3.7.15_32bit.exe Added: - Logic Analyzer: position (Nth word) option for SPI trigger on value - Impedance: Nyquist plot; settle time, minimum periods options - Wavegen, Network/Impedance Analyzer: external Amplification option - Tabbed/Docking window switching from main window Changed: - lower frequency limit for Scope, AWG, Network, Impedance Fixed: - 10ns delay in Logic Analyzer Sync and Protocol interface - Sound Card device CPU usage 3.7.14 digilent.waveforms_v3.7.14_64bit.exe digilent.waveforms_v3.7.14_32bit.exe Added: - Protocol I2C ACK/NAK last read byte option Changed: - Windows XP, Vista compatible FTDI driver in 32bit installer 3.7.13 digilent.waveforms_v3.7.13_64bit.exe digilent.waveforms_v3.7.13_32bit.exe digilent.waveforms_v3.7.13.dmg digilent.waveforms_3.7.13_amd64.deb digilent.waveforms_3.7.13_i386.deb digilent.waveforms_3.7.13.x86_64.rpm digilent.waveforms_3.7.13.i686.rpm Added: - Sound Card device of the computer can be used as Scope and Wavegen - Scope sampling clock for Electronics Explorer - Logic Analyzer data compression for recording, for Electronics Explorer - Scope and Wavegen support for 4th device configuration of Analog Discovery 1 & 2 - Scope Logging Repeat option - Scope Audio view: Stereo, Tempo options - MacOS option for application menu 3.7.12-2 digilent.waveforms_v3.7.12-2_64bit.exe Fixed: - Analog Discovery 2 configuration file descriptions 3.7.12 digilent.waveforms_v3.7.12_64bit.exe digilent.waveforms_v3.7.12_32bit.exe Added: - Scope sampling clock under time options, for Analog Discovery 1 & 2. The trigger IOs can be used as sample clock with delay and edge options. - Logic Analyzer data compression for recording, for Analog Discovery 1 & 2 Changed: - Windows installer: - embedded prerequisites: Windows Installer, Visual C++ Redistributable 9 32/64bit, 12 64bit - split installer for 32bit and 64bit WF applications, but the included WF runtime for custom applications support both architectures Fixed: - Logic Analyzer UART frame error threshold 3.7.10 digilent.waveforms_v3.7.10.exe Added: - Spectrum Analyzer Markers Fixed: - SDK Electronics Explorer enumeration - Scope Math channel unit presets 3.7.9 digilent.waveforms_v3.7.9.exe Fixing: - Logic Analyzer Event view double click for signals 3.7.8 digilent.waveforms_v3.7.8.exe Changed: - Impedance Analyzer: - view names - solid line for magnitude Fixed: - Impedance Analyzer admittance |Y| value 3.7.7 digilent.waveforms_v3.7.7.exe Added: - Scope and Logic trigger detector for trigger source Fixed: - warning message when connecting to EExplorer - Patterns trigger on Digital Discovery.
  37. 1 point
    bogdan.deac

    OpenCV and Pcam5-c

    Hi @Esti.A, SDx, which includes SDSoC (Software Defined System on Chip), is a development environment that allows you to develop a computer vision application, in your case, using C/C++ and OpenCV library. The target of SDx-built applications are Xilinx systems on chip (SoC) (Zynq-7000 or Zynq Ultrascale+). Xilinx SoC architecture has two main components: ARM processor (single or multi core) named Processing System (PS) and FPGA, named Programmable Logic (PL). Using SDx to build an application for SoC allows you to choose which functions from your algorithm are executed in PS and which ones are executed in PL. SDx will generate all data movers and dependencies that you need to move data between PS, DDR memory and PL. The PL is suitable for operations that can be easily executed in parallel. So if you are going to choose a median filter function to be executed in PL, instead of PS, you will obtain a better throughput from your system. As you said, you can use OpenCV to develop your application. You have to take into account that OpenCV library was developed with CPU architecture in mind. So the library was designed to obtain the best performance on some specific CPU architectures (x86-64, ARM, etc.). If you are trying to accelerate an OpenCV function in PL using SDx you will obtain a poor performance. To overcome this issue, Xilinx has developed xfopencv, which is a subset if OpenCV library functions. The functionalities of xfopecv functions and OpenCV functions are the same but the xfopencv functions are implemented having FPGA architecture in mind. xfopencv was developed in C/C++ following some coding guideline. When you are building a project, the C/C++ code is given as input to Xilinx HLS (High Level Synthesis) tool that will convert it to HDL (Hardware Description Language) that will be synthetized for FPGA. The above mentioned coding guideline provides information about how to write C/C++ code that will be implemented efficiently in FPGA. To have a better understanding on xfopencv consult this documentation. So SDx helps you to obtain a better performance by offloading PS and by taking advantage of parallel execution capabilities of PL. Have a look on SDSoC documentation. For more details check this. An SoC is a complex system composed by a Zynq (ARM + FPGA), DDR memory and many types of peripherals. Above those, one can run a Linux distribution (usually Petalinux, from Xilinx) and above the Linux distribution, the user application will run. The user application may access the DDR memory and different types of peripherals (PCam in your case). Also, it may accelerate some functions in FPGA to obtain a better performance. To simplify the development pipeline Xilinx provides an abstract way to interact with, named SDSoC platform. SDSoC platform has two components: Software Component and Hardware Component that describes the system from the hardware to the operating system. Your application will interact with this platform. You are not supposed to know all details about this platform. This was the idea, to abstract things. Usually, the SDSoC platforms are provided by the SoC development boards providers, like Digilent. All you have to do is to download the last SDSoC platform release from github. You have to use SDx 2017.4. You don't have to build your own SDSoC platform. This is a complex task. You can follow these steps in order to build your first project that will use PCam and Zybo Z7 board. The interaction between PCam and the user application is done in the following way: there is an IP in FPGA that acquires live video stream from the camera, the video stream is written into DDR memory. This pipeline is abstracted by the SDSoC platform. The user application can access the video frames by Video4Linux (V4L2). The Live I/O for PCam demo shows you how to do this. I suggest you to read the proposed documentation to obtain a basic knowledge needed for SDSoC projects development. Best regards, Bogdan D.
  38. 1 point
    Hi @Phil_D There is no zero padding option but it can be done with Script like this: var rg = Spectrum.Channel1.data // channel 1 time domain data var c = rg.length var t = rg[c-1] // last sample for(var i = 0; i < c; i++) rg.push(t) // 2x padding var rghz = Spectrum.Trace1.frequency var hz = 2.0*rghz[rghz.length-1] //var hz = 2.0*Spectrum.Frequency.Stop.value // scope sample rate Spectrum.Trace5.setSamples(rg, hz) Some other suggestions to improve the resolution: 1. For lower frequencies, with 1MHz sampling you can use the Scope to perform a longer recording. This will highly improve the resolution in the FFT view. 2. With AD you can select the second device configuration to have 16k Scope buffer. 3. You can select a higher bandwidth window, like rectangular or cosine. 4. In the latest beta version with CZT algorithm you can select higher number of bins, higher resolution. https://forum.digilentinc.com/topic/8908-waveforms-beta-download/ Here: - T1 is CZT BlackmanHarris 10x BINs, 244Hz resolution - T2 is FFT BlackmanHarris 4k BINs 2.4kHz resolution - T3 is FFT Cosine 4k BINs 2.4kHz resolution
  39. 1 point
    Heya Jon, Now it seems resolved. And I can move to other questions to Digilent (you can see that Xilinx thread you 've referred too) Thanks for your help on this.
  40. 1 point
    kwilber

    Pmod DA3 clocking

    After going through the code posted in this thread, I want to amend my explanation of the 40 bits from yesterday. In the testperiph.c file, the DAC is being written at line 104. DA3_WriteSpi(&myDevice, 0x3A, &Hops_reading, sizeof(Hops_reading)); Hops_reading is a 32 bit value, so sizeof(Hops_reading) = 4. In PmodDA3.c, in the function DA3_WriteSpi(), the 4 gets passed as nData. The function prepends a 1 byte control word with address and write information. The function ends up writing all 5 bytes using the Xilinx SPI driver. 5 bytes * 8 bits per byte = 40 bits which is what you observed on the wire. void DA3_WriteSpi(PmodDA3 *InstancePtr, u8 reg, u16 *wData, int nData) { // As requested by documentation, first byte contains: // bit 7 = 0 because is a write operation // bit 6 = 1 if more than one bytes is written, 0 if a single byte is written // bits 5-0 - the address u16 bytearray[nData+1]; bytearray[0] = ((nData>1) ? 0x40: 0) | (reg&0x3F); memcpy(&bytearray[1],wData, nData);//Copy write commands over to bytearray XSpi_Transfer(&InstancePtr->DA3Spi, &bytearray, 0, nData+1); }
  41. 1 point
    kwilber

    Facing error in the rgb2dvi IP

    I have a basic hdmi_passthru project for both an arty Z7 and a zybo Z7 that I just did while helping someone else last week. Starting with a known working project might let you compare the source files to see the differences. Are you interested in that? If so what board are you using?
  42. 1 point
    D@n

    Display image using VGA from block RAM

    @khaledismail, I agree with @jpeyron somewhat. I think you have at least two bugs in your design. One of them is that your VSYNC/HSYNC signals and pixel rate aren't necessarily matching the screen resolution you are trying to create. The second bug is that your block RAM values aren't synchronized with your VSYNC/HSYNC signals. All of these can be easily discovered through either formal verification or extended simulation. If you go the simulation route, your goal should be to repeat that image within the simulator, then you'll have all the "evidence" you need to find the bug. Dan
  43. 1 point
    Welcome to debugging, where things get interesting and your work grades your design effort. Hopefully, you don't have too much confidence in any such assertions like the one above. I find myself in your position more often than I'd like to admit. Sometimes it turns out to be something completely unexpected... usually it ends with a slap on the forehead and DOH! You idiot!... Fortunately, we're working in the PL so there are options, Hopefully you have a few spare IO pins. Just as a sanity check I'd bring out the TxD and RxD internal signals to new GPIO that I'd name dbg_xxx. These can be observed wiht a scope or since I always have a few TTL USB UART cables or modules lying around try to loop back communication to a second COM port in my PC. I'd certainly try getting the PC to talk to one of your boards directly through your current pin assignments.Pay careful attention to signal directionality and be sure to avoid two sources driving any pins which could be easy to do. I might use a mux in the PL controlled by a physical switch to help with that. I never ask myself "DO I have to draw you a picture?" because usually the answer is yes... Your brain might be wired differently. Have you verified that the current signal IO standards are correct? It might not hurt to revisit the Zynq documentation for moving PS UART pins to the PL... this isn't always totally straightforward. [edit] Oh, and I forgot to mention that when things get really confusing I plod through all of the Synthesis and P&R messages. Sometimes Vivado and I aren't understanding each other the way that I assume we do. If I were smarter, I'd probably do this step after each bitstream production... but I want to keep moving...
  44. 1 point
    Hi @ababa, Welcome to the forums. When Xilinx releases a new version of Vivado it can have unforeseen issues and Vivado 2018.3 was just recently releases. Please attach screen shots of the errors, block design and wrapper file. What type of project are you trying to create? Did you follow the digilent board files tutorial here? I followed an older microblaze tutorial for the Nexys 4 DDR here without issues. Here is a completed hello world microblaze project. When using this attached project make sure that you have installed the digilent board files. The only issue with Vivado 2018.3 and our content I am aware of is discussed in this forum here. Here is our resource center for the Nexys 4 DDR as well. cheers, Jon
  45. 1 point
    jpeyron

    Source Code in SDK

    Hi @Ahmed Alfadhel, In the Vivado block design you should use the board tab and select the pmod JD instead of the pmod JA. Unfortunately, we do not have the bandwidth to create the SDK code for the Pmod DA3. Here is a list of our Pmod's that use the SPI communication like the Pmod DA3. I would suggest to look at the IP Cores of the SPI communication Pmod's that are in the Vivado Library as a reference for you to make the SDK code for the Pmod DA3 IP core. I would also use the Arduino code here and the datasheet here as a reference for configuring and using the Pmod DA3. Typically when I create an IP Core I first work on configuring the IC and setting up communication. This might require you to use a bread board and a o-scope to verify that the SPI signals are correct. Then I create the read and write functions. Lastly I manipulate the date to be in the form I would like it to be in. You should only need to alter the PmodDA3.c, PmodDA3.h and the main.c in the Pmod DA3 IP Core. thank you, Jon
  46. 1 point
    Ok, thank you for the reply. I'll contact one distributor in my Country.
  47. 1 point
    Thanks. Please check gitHub again, I added a fourth folder "sharpDevelop_build" (5.1 from sourceforge). This should run out of the box, if a CMOD A7 35 is found, and no other Digilent USB interface is present. If more debugging is needed, my exception handler might get into the way. I'd comment out the try/catch. Alternatively, enable "pause on exception", as shown in the screenshot here: http://community.sharpdevelop.net/blogs/siegfried_pammer/archive/2014/08/27/customizing-quot-pause-on-handled-exceptions-quot-in-sharpdevelop-5.aspx When porting to sharpDevelop I ran into an issue with type casting and bit shifting: Running the older code on sharpDevelop will cause an overflow error. Don't know why, probably different interpretations (or versions?) of the standard. Whatever, it is fixed now by stating the problematic cast explicitly. To get rid of the relative link to top.bit (it's ugly), change this line in Program.cs bitstreamFile = @"..\..\..\busBridge3_RTL\busBridge3_RTL.runs\impl_1\top.bit"; Console.WriteLine("DEBUG: Trying to open bitstream from "+bitstreamFile); e.g. to bitstreamFile = "top.bit"; and copy top.bit into the folder where the .exe file is generated.
  48. 1 point
    jpeyron

    Differences in Max32 and chipKIT Max32

    Hi @raouf, Here is a list of our distributors. cheers, Jon
  49. 1 point
    shahbaz

    How to read from SD card on ZYBO

    hi @jpeyron, I followed the guide at GitHub under Readme in PMODSD. can you please guide me step wise on how to start from block design and than going to SDK and running the demo. I have added the pmodsd and zynq PS IPs, after auto connection and running the generate bitstream I get following error. I need your guidance at this
  50. 1 point
    attila

    Analog Discovery 2 vs Raspberry Pi 3

    FTDI USBs like AD, AD2, DD are not working with RPI model B (1,2,3) data packets/bytes are randomly lost. The EExplorer with different USB controller is working fine on these. All devices are working with other embeddeds: Zed, Zybo, BeagleBone… According reports AD is working with the original RPI model A and probably Zero because it has similar chipset/USB. The problem seems to be with FTDI or RPI B USB, library or hardware. You can find such comments regarding RPI problems with other devices too. Unfortunately we couldn't remediate this problem.