Popular Content

Showing content with the highest reputation on 07/10/20 in Posts

  1. 1 point

    Arty A7 flash clock

    Hi @[email protected] and @zygot, I apologize for the long delay. The pin is indeed still present on L16 on page 6 of the schematic and is almost certainly the intended use of that pin. I'm not sure why it's not the .xdc (or if it ever was, since realistically the .xdc was copied over from the original Arty .xdc before a bunch of other Arty branded boards were introduced), so I'm working to confirm that there isn't some reason that the pin should not be in the .xdc and then we get it added in. Thanks, JColvin
  2. 1 point

    Xc9536 jtag

    Hi @Jpyro1, In general, the Digilent programming cables are not compatible with the 9500 series CLPDs. There is one comment from another user on our Forum here, https://forum.digilentinc.com/topic/3607-jtag-usb-programming-xilinx-9536-with-impact/?do=findComment&comment=13548, that says they were able to program a 9536 CPLD by creating an SVF file with iMPACT and then program the device through Adept. I do want to clarify that those of us here at Digilent have not attempted this though, so I can't vouch for this method. Let me know if you have any questions about this. Thanks, JColvin